All products Made in Australia
**** Twinkler ****
No more need for expensive cumbersum Fibre-Optics for the starry night ceiling effect
|
Ideal for accent and mood lighting in commercial & residential settings, also suitable to light niche locations such as jewelry cases, pools, parks, exhibit cases, decorative down lights, landscape lighting etc. |
|
| Very easy to install: | |
| 1 | Just work out where you want to place your stars. Scatter them about to look like the night sky. Mark each spot withe a pencil. |
| 2 | Next drill a 12mm hole into the ceiling board where marked. |
| 3 | Insert the Twinkler by sliding it the into hole |
| 4 | The twinkler has only two wires. One is marked with a stripe and is the positive. A regulated 12 volt DC supply is required |
| 5 | Connect all positives together, and all negative together. |
| 6 |
Connect them to the regulated 12 volt DC supply. |
| 7 | Thats it! Now turn the power on and enjoy absolute relaxation under your own personal starry sky. |
| How it Twinkles | |
| The LED stays ON and at a random interval of up to a maximum of 10 seconds it will 'Flick' OFF/ON for a period of 0.2 seconds. Upon the next 'flick' it will turn OFF/ON for a period of 0.1 seconds - repeating thus continuously for as long as the 12 volt DC power is applied. The slightly different 'Twinkle' time enhances the overall effect for maximum benefit. | |
|
|
